These units have been well-proven over many years and are widely used in discharging under adverse pressure conditions, materials such as cement, PFA, granite dust, silica sand, mineral powders etc.

7 Standard Valve sizes available 150mm to 600mm to give capacities up to around 115m³/hr

Replaceable internal components allow for on-site refurbishment.

Standard Valves manufactured in Cast Iron / SG Iron/ Ni-hard / Carbon steel construction with round and square flange options. To further enhance durability replaceable body liner can be hard chromed or ceramic coated.

Rotor shaft sealing options include various types of gland packing, mechanical seals, air or grease purge.

EBS Series designed for feeding a wide range of powdered solids direct into a pneumatic conveying pipeline.

EBS Series has an integral pipe connection giving low headroom and efficient pocket purging.

NOTE: Service life of these Valves will vary according to the service conditions prevailing. Selection must be undertaken with care and system conditions where possible adopted to ensure maximum service life. Our Technical Department will be pleased to make recommendations as appropriate.